10-26-2009, 02:21 PM
#1
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Black Lenso VPD rear skinnies with 24" MH tires $500
Skunk2 Pro1 Cams New $550
B Series T4 Full-Race twinscroll topmount Jet Hot chrome coated with 4" DP and downturn. The manifold was recently recoated and has about 10 dyno passes and 3 passes on track. $950
Custom Matching Garrett Core 28x4.5x12 Backdoor intercooler with tial 50mm bov flange, 2.5" inlet and 3" end tank to tb. Matching 3" cold side piping jet hot coated with GM IAT bung welded. $750
S372R with 1.25 ar30 dyno passes and 20 passes at the track SOLD
0 Miles GSR Head with Stock Valves, Supertech springs and retainers, fresh 3 angle, port matched to gasket and mild polish (no chamber work) SOLD
GSR Transmission with Quaife LSD, freshly rebuilt SOLD
0 miles Stock port GSR head with Crower springs and retainers and Supertech valves, fresh 3angle etc.. Head has not been milled. SOLD!
2 sets Used CTR Cams SOLD
Custom catch can setup with lines and JDM ITR valve cover SOLD
IPG Scattershield SOLD!
DSS 3.9 axles with spindles SOLD!
Black V2 13x8 rims with MH 25" slicks 20 passes SOLD!!
Edelbrock Victor X for GSR ported for 72mm tb used SOLD
RPM Service 72mm Throttle body SOLD
B series Exedy twindisk, needs new plates SOLD
Summit -8an 10 micron fuel filter $40
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
Last edited by 00ITR #543; 11-16-2009 at 07:23 PM .
10-26-2009, 09:09 PM
#2
Member
Join Date: Jul 2004
Location: westminster, ca, us
Posts: 3,043
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Pm'd
10-26-2009, 11:06 PM
#3
Junior Member
Join Date: Apr 2005
Location: vancity, BC, Canada
Posts: 468
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
PM'd. Might take the manifold and axles if we can work out a package deal.
__________________
EG Hatch - 1.8L GE Sleeved, Topmount GT35R and twin 40mm gates. Times and HP in 2010!
10-27-2009, 08:10 AM
#4
Member
Join Date: Jun 2006
Location: Brick, NJ, usa
Posts: 1,124
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
got pics of the scattershield n manifold pm me thanks
10-27-2009, 08:16 AM
#5
Junior Member
Join Date: May 2009
Posts: 23
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Still have those cams pm me please
10-28-2009, 09:11 AM
#6
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
bump
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
10-28-2009, 09:34 AM
#7
Senior Member
Join Date: May 2001
Location: Spokane, WA
Posts: 11,495
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
u have pics of the cams?
10-28-2009, 09:47 AM
#8
Member
Join Date: Nov 2007
Location: Apple Valley, CA, USA
Posts: 2,502
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
ttt for cam pics
__________________
vouches: nick32 (pfab manifold), krx 7056 (k24 head), acuraturbo90 (moroso oil pan), devsol (gsr transmission), JER BEAR#uno (ek hood), trustdestruction (turbonetics 38mm wastegate), #1DA2HATE (BDL fuel rail), hayden187 (Crower Turbo Cams), B16 Head (GBear)
10-30-2009, 07:09 AM
#9
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Quote:
Originally Posted by
JDMInteg96
ttt for cam pics
Pics of the GSR Head with the Crower valvetrain are up. Had 2 sets of CTR cams, sold the set that was off the car and still have another set on the car. Have to take them off and take pics still..
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-01-2009, 04:21 PM
#10
Junior Member
Join Date: Apr 2006
Location: D16z6, PA, usa
Posts: 396
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
pmed
__________________
- 95 EJ1 - Daily Driver
- 95 GSR swap w/ JDM ITR header, blox IM, and soon ITR cams
- 91 Supra Turbo - weekend warrior - Stock Jdm 7mgte - 3in turbo back(4sale)
11-01-2009, 05:35 PM
#11
Junior Member
Join Date: Jul 2008
Location: El paso, TX, US
Posts: 118
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
can I get some pictures of the cams? How old?miles?
11-01-2009, 07:58 PM
#12
Junior Member
Join Date: Jul 2008
Location: easton, pa, usa
Posts: 469
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
summit filter new?
11-02-2009, 04:10 AM
#13
Member
Join Date: Dec 2004
Location: Halifax, NS Canada
Posts: 2,167
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
bump, looking for pics of the manifold/dp
I sent you a PM
__________________
10 Second EG Project - not there yet.
493whp 337 TQ @ 21 psi....more coming!! Topmount GT3582R
84mm LS/Vtec GE Sleeved, Pauter Rods/CP Pistons R.I.P. Earl Laskey
11-02-2009, 08:17 AM
#14
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Cams have 10k on them.
Summit filter is used...
Pics of cams and topmount will be up soon..
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-03-2009, 01:08 PM
#15
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Bump more pics are up.. Sale on cams pending... topmount pics are up along with other stuff
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-03-2009, 07:14 PM
#16
Junior Member
Join Date: May 2006
Location: northshore, MA, USA
Posts: 870
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Bump for good seller
__________________
XBL- iSilvaboy
CANON 40d user- still learning
11-04-2009, 09:30 PM
#17
Junior Member
Join Date: May 2006
Location: northshore, MA, USA
Posts: 870
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
upp
__________________
XBL- iSilvaboy
CANON 40d user- still learning
11-05-2009, 01:52 PM
#18
Junior Member
1999 Honda Civic
Join Date: Mar 2008
Location: NJ, USA
Posts: 608
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
still have ctr cams? mint condtion?
__________________
94 eg coupe - sold
05 wrx wagon - sold
99 em1 coupe - current vehicle
11-05-2009, 04:51 PM
#19
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
Quote:
Originally Posted by
Milab21
still have ctr cams? mint condtion?
cams are sold! bump!!
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-06-2009, 11:39 AM
#20
Member
Join Date: Nov 2007
Location: Apple Valley, CA, USA
Posts: 2,502
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
ttt
__________________
vouches: nick32 (pfab manifold), krx 7056 (k24 head), acuraturbo90 (moroso oil pan), devsol (gsr transmission), JER BEAR#uno (ek hood), trustdestruction (turbonetics 38mm wastegate), #1DA2HATE (BDL fuel rail), hayden187 (Crower Turbo Cams), B16 Head (GBear)
11-07-2009, 12:07 PM
#21
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
all pms replied to
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-09-2009, 10:46 AM
#22
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
bump
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-16-2009, 07:24 PM
#23
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
bump, sk2 cams, skinnies, mani, dp and intercooler are left..
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
11-19-2009, 03:01 PM
#24
Member
Join Date: May 2000
Location: Chicago, IL, USA
Posts: 1,762
Re: Edelbrock, Full-race, CTR cams, GSR Head, Supertech, Crower, DSS Axles etc
bump
__________________
http://www.ILLgarage.com
1998 SFWD Civic EK Hatch 10.1@146 34psi 372R
2000 ITR 461whp/309ft lbs @19.5psi 93 octane
Tags
60089 , axles , b16 , cam , cams , ctr , dss , edelbrock , full , gsr , head , heads , ipg , port , race , series
Thread Tools
Search this Thread
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off