I'm selling my old set of lca's. The bushings that came in them went out after not too long as they all tend to do. I replaced them with OEM bushings from Honda. These have a few thousand miles on them and are in good shape. The R side lca has a spot that faces the front from where my exhaust had rubbed it for a little before I fixed it. Both of the lca's have pits on the part facing the front of the car, I guess form rocks and road debris. When on the car, they look fine. Nothing could be seen when they were on. Ive pictured the defects.
These are for an EK but from what ive heard they can be mounted to eg or dc chassis by either putting a few spacers on the shock mount or grinding a little bit of the metal sleeve in the bushing. Either way, its still minor.
$60picked up
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!
^^it doesn't jeopardize the structural integrity of the the arm itself though, all LCA's get like this eventually, from far away, you wouldn't be able to see the scratches anyways.
__________________ THE MORE I LEARN, THE MORE I REALIZE I DON'T KNOW SHIIT
Near Columbia. Hell no not $45. Any set you will put on a car will be all pitted up like that within a matter of weeks. Not to mention they have fairly new oem bushings instead of the POS blox ones
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaMarketPlace.com content, comments, or advertising. HondaMarketPlace.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaMarketPlace.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
FS: Silver Blox LCA's for EK
