need to sell off the rest of my EG stuff...S2K needs a heart-transplant lol, More pics avail. upon request
Fluidyne radiator w/FAL fan (under 5k miles)------$325 o.b.o
S2000 front brake retro-fit on LS teg knuckles w/ Earl's lines and BLOX extended wheel stud (pics with 16" rim)-------$300 o.b.o
EP rear disc retro on EG trailing arms needs pads------$200
black Denji's MINTY-----$200
fresh powder-coated (black) 16" Black racing Pro N1's w/Yoko Parada Spec-2's (80% tread) OFFER, serious inquires PM me for pics
Eg cluster w/tach---$40 (213,955 miles)
EG hatch mudflaps, new from Honda,only test-fitted----offer
ASR subframe brace EG/DC (under 2k miles)---$old
LS bottom end with Type-r pistons, Probe I-beam rods, Hastings piston rings--(not assembled)--$250
obd0 B16 head complete minus dizzy---offer (will do head, bottom-end and trans for $750 o.b.o)
2 LS trannys both are minty 1 cable 1 hydro----$225 a piece!
also still have my built/stroked LS-V swap availible (3500 o.b.o)
(KING estimated 230+whp) *ZERO miles* (motor was never BOOSTED, just test fit for clearance for friends EG)
B18b1 block
CROWER 81x95 Stroker kit w/lightweight crank (1.96L)(12.18:1 final compression ratio)
4340 forged 95mm crank
pro series rods (ARP hardware)
ACL bearings (race) rods and crank
Moroso oil pan
Golden Eagle LS/V kit (did NOT use the headgasket)
ARP headstuds
B16 PR3-2 head
mild port and polish
Skunk2 valves,springs,retainers
Skunk2 Pro2+ cams
Skunk2 Pro cam gears
Skunk2 carbon-composite fuel rail
Edelbrock Performer-X I/M (port matched to headwork and 70mm T/B)
70MM BBK power plus T/B
Hondata I/M gasket
B16 S4C trans (PERFECT NO GRINDS)
ACT Prolite flywheel
E-GAY stage 2 clutch (planned to use for break in ONLY)
Avid B-EG mounts
Avid Shift linkage
P28 w/moates ostrich
also included:
Fake spoon valvecover (keeping mine) lol
JDM ITR oil cap (woot woot)
Alternator
half-shaft
wiring harness
vtec solenoid
pocket lint....
when i first got it back...... AN-R header not iclnuded!
after swapped into my car (used for mock-up on a turbo kit)
how it sits forsale....
UPDATED MORE STUFF FS!! 11/9
2 sets of stock CRX headlights-$40 a pair
2 sets of stock CRX tails-$35 a pair
2 sets EG 4dr. tails-$25 a set
EG traction bars-$100 made by SKUNK(Sheeso Moua)
2 uknown white 16's-fresh powdercoat-$125
If interested shoot me a TXT at (920)382-9363...AK
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Honda-Tech!
__________________
00' BB AP1 Dumped on Mono-Flex's-Cusco caged out Baller Status<---need a longblock!
Last edited by ef9_frosty; 11-13-2009 at 05:39 AM.
Reason: PICS!
__________________
WTB 1 16in Black Racing Pron1 wheel must be 4x100 and 44mm offset. Color does not matter. I will pay high dollar for this rim I just need one please help me out.
__________________
WTB 1 16in Black Racing Pron1 wheel must be 4x100 and 44mm offset. Color does not matter. I will pay high dollar for this rim I just need one please help me out.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for HondaMarketPlace.com content, comments, or advertising. HondaMarketPlace.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse HondaMarketPlace.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.