Print  Email  Subscribe  RSS  Help
 NEW MFactory Forged Helical LSD's - PRE-ORDER NOW FOR ONLY $584.95 SHIPPED! B16A IN STOCK!First  1 2 3 4 5 >  Last
Author Post

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
  MFactory Close Ratio Gear Sets - Proven 21% Increase In Performance!« » 3:37 AM 4/13/2006 Reply  Edit

Hello Honda-Tech,

Achieve the ultimate in acceleration with the MFactory Close Ratio Gear Sets, Final Drives and Limited Slip Differentials!

Diamond Cut to exacting tolerances from fully Carburized Forged Nickel-Chromoly Steel and put through our own proprietary heat treatment process, you will not find a stronger, more reliable product on the market. Our special treatment process makes our gears several times stronger than OEM Gears and are specifically designed to endure the demanding requirements of high-power track/drag cars.

MADE FROM 100% PURE AUSTRALIAN STEEL

CLOSE RATIO GEARS

B16A/18C Forged 3.070 1st Gear: As used by several top contenders, providing a consistent 0.2sec reduction in 60ft times and proven to withstand 750+ horsepower! If used in conjunction with our Close Gear Sets, this will offer you a true 1st-5th close gear setup. Will not fit JDM B18C '98 Spec

MSRP: $249.95 + Shipping

Close Ratio Gears (B16A/18C):
3rd - 1.625 or 1.695
4th - 1.296 or 1.384 (Slight modification required to transmission casing when installing 1.384)
5th - 1.000 or 1.130 or 1.210

MSRP: From $749.95 + Shipping

Close Ratio Gears (L13/15 FIT/Jazz):
3rd - 1.285
4th - 1.030
5th - 0.886

MSRP: $799.95 + Shipping

Close Ratio Gears (D15/16):
3rd - 1.565
4th - 1.250 (OEM 3rd Gear)
5th - 1.000

Please Note: D15/16 kit consists of 3rd and 5th gear only. Stock 3rd gear can be reused as 4th gear (Slight modification required).

MSRP: $624.95 + Shipping

Pro Series "Turbo" Gear Set (B16A/18C Pro): As requested by our large number of drag racing customers, we are proud to offer our pro-series gear set for the B-Series transmission, designed to withstand high-horsepower boosted applications! A highly recommended upgrade for those running 500hp+. As used on several 8sec/9sec Hot Rod & SFWD Drag Cars.

By keeping our gears synchronous engagement, our gears are a direct swap for your oem gears with no further parts required for installation and, unlike a dog transmission, are suitable for a daily driver.

1st - 3.070 (MF-TRS-01B. Optional)
2nd - Re-use OEM 2nd gear
3rd - 1.430 (Straight Cut)
4th - 1.100 (Straight Cut)

MSRP: $1499.95 + Shipping
ORDER WITH 1ST GEAR: $1699.95 + Shipping

Subaru WRX Close Gear Set (5speed. Includes new mainshaft): As requested by our growing number of Auto-X and Time Attack customers, we are proud to offer our specialist forged gears to the Subaru Community

1st - 3.270
2nd - 2.286
3rd - 1.667
4th - 1.238
5th - 0.958 (Optional)

MSRP: $2299.95 + Shipping
ORDER WITH 5TH GEAR: $2549.95 + Shipping

FINAL DRIVE GEARS

By changing your final gear ratios, you can experience a dramatic increase in acceleration throughout the rev-range, giving you on average, a 15% increase in torque at any given speed over the OEM Final Drive. Infact, on a USDM Integra Type-R with stock 4.4 Final Drive, when driving along at 57mph, you will have an extra 38whp on tap with our 4.928 Final Drive!

B-Series Fitments:
B16A Cable (Non-oem LSD) - 4.928
B16A2 Hydro (Non-oem LSD) - 4.05, 4.785, 4.928
B16B/18C - 4.05, 4.785, 4.928
B18C JDM '98 Spec - 4.05, 4.785, 4.928

MSRP: $549.95 + Shipping
PRO Series: Designed for high-horsepower applications. $749.95 + Shipping

D-Series Fitments: 4.5, 4.7, 4.9
MSRP: $534.95 + Shipping

H-Series Fitments:
4.64 MSRP: $549.95 + Shipping
5.15 MSRP: $749.95 + Shipping

Honda FIT/Jazz Fitments: 4.47, 4.687
MSRP: $549.95 + Shipping

R18A SOHC i-VTEC Fitments: 4.687, 4.928
MSRP: $749.95 + Shipping

K-Series Fitments: 5.46, 5.84, 6.33
MSRP: $749.95 + Shipping

S2000 Fitments: 4.43
MSRP: $549.95 + Shipping

Important Notice: We have recently become aware of cheap and inferior "copies" of our Final Drives & Close Ratio Gear Sets, including our own custom ratios, being made available on the market. These DO NOT go through the same forging and heat treatment processes and will compromise your safety if installed on your vehicle. STAY SAFE and only purchase your Final Drives & Close Ratio Gears Sets from an Authorized MFactory Dealer

LIMITED SLIP DIFFERENTIALS

Gain a prominent advantage over the competition with the MFactory Helical LSD.

Through the smooth and constant distribution of power to the wheels, the MFactory Helical LSD puts the power-to-the-ground and maximises your vehicle's traction. A must for any FWD race car, be it Street, Strip or Track!


- Made from 100% Pure Australian Steel, NOT cheap Chinese Steel
- Precision-machined from High-Tensile Forged Chromoly Steel for increased strength and durability
- Only the highest quality Brighton-Best Hardware is used
- Maintenance-free Gears eliminates the need for special fluids & rebuilds associated with plate-type LSDs
- Lock-free operation ensures no adverse affect to steering response

Fitments: B16A2, B16B/18C, H22A, K20A, FIT
MSRP: $649.95 + Shipping

B16A2 FITMENTS IN STOCK

HT PRE-ORDER SPECIAL: A Honda-Tech Exclusive. Pre-Order your MFactory LSD and Save 10% off our MSRP + Free Shipping!

- ONLY $584.95 inc Shipping!

Pre-Orders apply for the following fitments:

B16B/18C Fitment: Under Testing. Lead Time, approx. 4-6 weeks
FIT Fitment: Under Testing. Lead Time, approx. 4-6 weeks
H22A Fitment: Under Testing. Lead Time, approx. 6-8 weeks
K20A Fitment: Under Development. Lead Time, approx. 8-10 weeks
Subaru Fitment: Under Development. Lead Time, approx. 8-10 weeks

To Pre-Order your MFactory LSD, please send me a PM

To order at HT Pricing (Online Ordering Only), please click here: www.teamMFactory.com

Modified by MFactory at 9:21 AM 10/2/2008


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!



MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 9:57 PM 4/20/2006 Reply  Edit

A lot of people have asked us for a base example of what to expect when fitting our products, so here you are. This is based on a stock B16A2 with S4C Box (8500rpm limit, stock gear ratios, stock 4.4 FD). Note that top speed is high as this does not include Aerodynamic Drag as a factor. All speeds are Approximate but gives you a good example:

1st: 40mph
2nd: 62mph
3rd: 90mph
4th: 118mph
5th: 154mph

With 4.05 Final Drive:
1st: 44mph
2nd: 67mph
3rd: 97mph
4th: 128mph
5th: 167mph

With 4.785 Final Drive:
1st: 37mph
2nd: 57mph
3rd: 82mph
4th: 108mph
5th: 142mph

With 4.928 Final Drive:
1st: 36mph
2nd: 55mph
3rd: 80mph
4th: 105mph
5th: 137mph

With Close Ratio Gear Set:
1st: 40mph
2nd: 62mph
3rd: 77mph
4th: 94mph
5th: 131mph

With Close Ratio Gear Set + 4.05 Final Drive:
1st: 44mph
2nd: 67mph
3rd: 84mph
4th: 102mph
5th: 142mph

With Close Ratio Gear Set + 4.785 Final Drive:
1st: 37mph
2nd: 57mph
3rd: 71mph
4th: 87mph
5th: 120mph

With Close Ratio Gear Set + 4.928 Final Drive:
1st: 36mph
2nd: 55mph
3rd: 69mph
4th: 84mph
5th: 117mph


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 7:49 PM 4/25/2006 Reply  Edit

Another review from one of our happy customers:

Vehicle: Mildly modified UK CRX Del Sol Vti (B16) with 4.4 Final Drive
3rd Gear 40-70mph: 20.3% Improvement
4th Gear 40-70mph: 17.5% Improvement
5th Gear 40-70mph: 17.6% Improvement
Average Improvement: 18.5% Improvement over 3rd/4th/5th Gears
Comments: "After fitting the gears into my car, I went for my first drive and there seemed to be an invisible thread pulling the corners of my mouth as on shifting into third, I couldn't suppress a grin - then shifting to forth, I started to giggle"


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

itr1244




Offline

9455 posts [99%]
5-9-2002
 « Re: (MFactory)« » 11:30 PM 4/25/2006 Reply  Edit

mfactory = infinitude?

Jayboy




Offline

282 posts [100%]
NW wa
7-9-2003
 « Re: INFINITUDE Close Ratio Gear Sets - Proven 21% Increase In Performance! (MFactory)« » 11:45 PM 4/25/2006 Reply  Edit

ZOMG, D-series! , these are coming right after Koni's get here.


1994 civic HB- Built SOHC Turbo: current

EDIT: JDM D15B currently, all stock baby!

(\__/)
(o.O )
(> < )
EMO Bunny

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 6:00 AM 4/26/2006 Reply  Edit

itr1244: MFactory is our store name. INFINITUDE is one of our in-house brands

Jayboy: Have plenty in stock


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

foumer




Offline

167 posts [100%]
Jersey NJ
12-23-2003
 « Re: (MFactory)« » 8:36 AM 4/26/2006 Reply  Edit

On the F22/H22 trannies do you have to modify or buy anything to make the final drives fit? Also have you tested this final drive set to see what mph gains are over stock F22/h22 trannies?
Thanks


Nothing like a check engine light to ruin your day
Ls/vtec powa.
12.82 na setup
11.972 on 100 shot

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 9:03 AM 4/26/2006 Reply  Edit

foumer: Nope, the H22A FD's fit straight on, no modifications required

You will not gain mph after fitting the H22A FD as the 4.64 will bring your gear ratios closer (i.e You will lose top speed). Unlike the B-Series, we do not currently have a longer FD for the H22A.


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 5:46 AM 4/28/2006 Reply  Edit

UPDATE

We are proud to announce the release of our longer 1st Gear for B-Series transmissions with a 3.077 ratio.

The 1st gear will work with the stock shaft - Our uprated shaft is not required to install.

If installed along with our 3rd/4th/5th Gear Set (Stock 2nd can be reused), this will give you a True 1st-5th Close Ratio Gear Setup


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

Bintec




Offline

56 posts [100%]
na na
4-16-2006
 « Re: (MFactory)« » 9:17 AM 4/29/2006 Reply  Edit

Hi,

Any close ratio 1,2,3 for my D16Z6 SOHC ride? If yes, how much is the princing? If no, any chance of you guys manufacture some in the near by future? Looking forward to yr reply, cheers


MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 11:50 AM 5/3/2006 Reply  Edit

Bintec: Unfortunately, we only have the 3rd/5th close gear setup for the D-Series at the present moment.


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 9:19 PM 5/14/2006 Reply  Edit

All PM's replied to. Keep the orders coming guys


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

zc911


Offline

1046 posts [100%]
Toronto On
6-26-2002
 « Re: (MFactory)« » 7:58 AM 5/15/2006 Reply  Edit

does the FD set include eveything to go into a USDM ITR box?


http://www.top-speed.ca

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 9:44 AM 5/15/2006 Reply  Edit

zc911: No, you will require some JDM parts for the Final Drive to fit the USDM transmission


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

zc911


Offline

1046 posts [100%]
Toronto On
6-26-2002
 « Re: (MFactory)« » 11:11 AM 5/15/2006 Reply  Edit

1st gear 23421-P80-E30
Distance collar 23914-P80-E30
Needle bearing 91107-P80-E31

these are them correct? any idea where to get them and how much?


http://www.top-speed.ca

itr1244




Offline

9455 posts [99%]
5-9-2002
 « Re: (zc911)« » 5:34 PM 5/15/2006 Reply  Edit

Quote, originally posted by zc911 »
1st gear 23421-P80-E30
Distance collar 23914-P80-E30
Needle bearing 91107-P80-E31

these are them correct? any idea where to get them and how much?

x2 still have to get them to put my final gear


MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 8:56 PM 5/17/2006 Reply  Edit

Yep, those are the parts required

There are quite a few sponsors on this forum that are able to get you the jdm parts for good prices


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

GarageAlchemist
BANNED



Offline

0 posts [0%]
ma
1-26-2006
 « Re: (MFactory)« » 7:32 AM 5/18/2006 Reply  Edit

very very intresting... VERY intresting.. can we see a movie of these in action, compared to stock, how much of a diffrence it is ?

i know the ratio is small, but i can't really wrap my head around it. I think sales would go up if our little civics where blasting threw the gear box like a hooker doing a rail of coke.

VIDEO PLEASE !!!


Bense
FormFollowsFunction



Offline

9013 posts [101%]
p1mping my calculator, SC
3-17-2003


My Gallery
 « Re: (GarageAlchemist)« » 2:09 PM 5/18/2006 Reply  Edit

For those that are interested in the RPM differences between the gears. MPH difference is helpful, but RPM difference is the other part of the equation.

Taken from my transmission page (http://thebense.livejournal.com/56502.html)


LS transmission
1.900 / 3.230 = 0.58824 or 58.824%
1.269 / 1.900 = 0.66789 or 66.789%
0.966 / 1.269 = 0.76123 or 76.123%
0.714 / 0.966 = 0.73913 or 73.913%

GSR transmission
1.900 / 3.230 = 0.58824 or 58.824%
1.360 / 1.900 = 0.71579 or 71.578%
1.034 / 1.360 = 0.76029 or 76.029%
0.787 / 1.034 = 0.76112 or 76.112%

B16/USDM ITR tranny
2.105 / 3.230 = 0.65170 or 64.170%
1.458 / 2.105 = 0.69264 or 69.264%
1.107 / 1.458 = 0.75926 or 75.926%
0.848 / 1.107 = 0.76603 or 76.603%

JDM ITR transmission
2.105 / 3.230 = 0.65170 or 64.170%
1.458 / 2.105 = 0.69264 or 69.264%
1.034 / 1.458 = 0.70919 or 70.919%
0.787 / 1.034 = 0.76112 or 76.112%

gsr 1st & 2nd, b16 3rd and 4th, gsr 5th (hybrid tranny mentioned below)
1.900 / 3.230 = 0.58824 or 58.824%
1.458 / 1.900 = 0.76737 or 76.737%
1.107 / 1.458 = 0.75926 or 75.926%
0.787 / 1.107 = 0.71093 or 71.093%

b16/itr 1st & 2nd, infinitude 1.695 3rd, 1.384/1.296 4th, 1.0 5th gears
2.105 / 3.230 = 0.65170 or 64.170%
1.695 / 2.105 = 0.80523 or 80.523%
1.384 / 1.695 = 0.81652 or 81.652% or 1.296 / 1.695 = 0.76460 or 76.460%
1.000 / 1.384 = 0.72254 or 72.254% or 1.000 / 1.296 = 0.77160 or 77.160%

gsr 1st & 2nd, infinitude 1.695 3rd, 1.384/1.296 4th, 1.0 5th gears
1.900 / 3.230 = 0.58824 or 58.824%
1.695 / 1.900 = 0.89210 or 89.210%
1.384 / 1.695 = 0.81652 or 81.652% or 1.296 / 1.695 = 0.76460 or 76.460%
1.000 / 1.384 = 0.72254 or 72.254% or 1.000 / 1.296 = 0.77160 or 77.160%


infintiude 1st, b16/itr 2nd, infinitude 1.695 3rd, 1.384/1.296 4th, 1.0 5th gears
2.105 / 3.077 = 0.68410 or 68.410%
1.695 / 2.105 = 0.80523 or 80.523%
1.384 / 1.695 = 0.81652 or 81.652% or 1.296 / 1.695 = 0.76460 or 76.460%
1.000 / 1.384 = 0.72254 or 72.254% or 1.000 / 1.296 = 0.77160 or 77.160%




Calculus 3 | Engineering Statics (Statics, NOT statistics.) | Physics w/ Calculus

http://www.honda-tech.com/zerothread?id=2378468

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 7:51 AM 5/19/2006 Reply  Edit

Thanks Bense


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

DelSolMike




Offline

427 posts [100%]
Onalaska WI
3-6-2004
 « « » 9:26 PM 5/19/2006 Reply  Edit

PM'd!


1997 del Sol Si-T

http://www.BoostFed.com
http://www.laskeyracing.com

Sold To: Zxc4, 95Sol


MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 1:33 AM 5/25/2006 Reply  Edit

Sorry for the delayed replies, all PM's have been replied to. We just got back from our exhibition in Taiwan, so this week has been really hectic for us


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 6:38 AM 5/29/2006 Reply  Edit

Just a quick mention for the new Fit owners out there: We now have our L-Series FD's in stock and ready to ship out


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

MFactory
Honda-Tech Sponsor



Offline

1767 posts [100%]
Somewhere Out There
12-2-2005
 « « » 7:27 PM 6/5/2006 Reply  Edit

All orders shipped out

Keep the orders coming


Come see us at SEMA '08. North Hall, Booth #10577 (next to the Kenwood Booth)

MFactory Forged Helical LSD's - Pre-Order NOW for $584.95 Shipped!

Bense
FormFollowsFunction



Offline

9013 posts [101%]
p1mping my calculator, SC
3-17-2003


My Gallery
 « Re: (MFactory)« » 7:34 PM 6/5/2006 Reply  Edit

i <3 my gears


Calculus 3 | Engineering Statics (Statics, NOT statistics.) | Physics w/ Calculus

http://www.honda-tech.com/zerothread?id=2378468
   First  1 2 3 4 5 >  Last

» Return to Performance
Forum Jump
Quick Reply

Powered by ZeroForum 2.1.2b. ©2008 RelyNet, Inc.

Go


 Forums
HMP

» News and Announcements

Sponsor Marketplace

» Performance

» Misc and Appearance

» Wheel, Tire and Suspension

» Forced Induction

Honda-Tech MarketPlace

» For Sale

» Want to Buy

» Forced Induction

» Vehicles for sale

» Motorcycles

Regional Classifieds

» Northern California

» Southern California

» Florida

» Texas

» Northwest

» Southwest

» Mid-west

» Mid-Atlantic

» Northeast

» Southeast

» Canada